These equipments are suitable for transferring & spraying paint, explosive liquids, oils, high viscosity coatings, low solvent, semisolid coatings, marine coatings as well as proportionating pumps for two component systems. Specifically for handling & spraying resin & hardener

Name	Pre ssure Ratio	Output / Cycle	Recom mended Spray Volume / min	Air Inlet Pres sure Max.	Output Pres sure Max.
S601	60:1	290 CC	7.5 Lit	6 Bar	360 Bar
S 451	45:1	115 CC	7.5 Lit	6 Bar	270 Bar
S 401	40:1	290 CC	7.5 Lit	6 Bar	240 Bar
S 361	36:1	150 CC	6 Lit	6 Bar	216 Bar
S 21	2:1	250 CC	18 Lit	6 Bar	12 Bar
S 461 M	46:1	95 CC	4 Lit	6 Bar	276 Bar

These equipments are suitable for transferring, spraying & extruding high viscous Adhesives, Sealant, Grease, etc. Applications:

• Automobile Industry
• Locomotive Painting
• Marine Painting
• Furniture Industry
• Structural Painting
• Aeronautical Industry
• Food Industry
• Petrochemical Industry
• Pharmaceutical Industry Features: Stainless steel rust proof hydraulic circuit. High flow rate. Easy maintenance. Light and easy to handle. Technical Specification

Model	T-21	S-331	S-451	S-601
Ration	2:1	33:1	45:1	60:1
Output Per Cycle	250 CC	40 CC	115 CC	290 CC
Fluid output Ltr./ Min	18 Ltr.	3 Ltr.	5 Ltr.	7.5 Ltr.
Air Inlet Pressure Max.	6 Bar	6 Bar	6 Bar	6 Bar
Output Pressure Max.	12 Bar	198 Bar	270 Bar	360 Bar.

Pressure feed containers are used to allow the coating material to be prepared, thinned and conditioned, constantly agitated if required and then supplied it. 

• Light weight construction
• Stain less steel needle.
• Precision air and fluid adjustments.
• Needled and nozzle tip combination available in 1.1 mm, 1.4 mm, 1.8 mm. • Applicable in automobiles & electrical, pharmaceuticals, textile, furniture, ceramics and foundry.
  

We also manufacture high quality automatic agitator pumps which are been used for mixing the different paints. The agitator comes with 3 blade rotators which is connected to a motor with a long shaft. The agitators supplied by us runs on the AC power supply.

These pumps are suitable for transferring high volume low pressure paints liquids as well as highly explosive liquids & Solvents. These pumps are suitable for paint circulation systems as well as electrostatic painting systems.
Features:-

• High flow rate, low air consumption
  
• Multiple guns can be operated on single pump
• Ideal for high production rate
  
• Frequent colour change is possible.

We also supply the paint spray hose which are been made with high quality paint resistant plactic which is flexible in nature. The length of the hose depends on the client's requirement, but we also provide the hoses with the standard lengths of 10m and 20m.

Pressure feed containers are used to allow the coating material to be prepared, thinned and conditioned, constantly agitated if required and then supplied it. 

•  Pressure feed tanks are available in 5 ltr, 9 ltr, 22 ltr and 45 ltr capacities
• M.S. and SS materials of construction
• These tanks can also be attached to an automatic agitator if required
• Feed and flush system by using 2 or more containers is also available